Mining & Milling Brief | 2 November 2026 | News window expanded to 7 days
When a concentrator changes the source of its ore, a familiar metal grade does not establish a familiar grinding duty. The useful question for plant and purchasing teams is whether the material being tested represents the material that will actually enter the mill.
The news: an ore-source question behind the restart
Excellon’s October 29 Mallay update describes test-milling campaigns using stockpile and narrow-vein feed; commercial production has not been declared. [1]
A June 2025 technical report describes ball milling with cyclone classification. This is historical circuit information, not confirmation of the current configuration. [2]
The following is Gangyan’s general engineering interpretation. It does not establish Mallay’s current ore hardness, ball specification or purchasing arrangements.
Keep three different questions separate
Grade describes valuable-metal content. Grindability concerns resistance to size reduction. Abrasivity concerns the material’s tendency to wear contacting surfaces. Similar assay results do not, by themselves, settle the other two questions. SGS’s 2011 technical review likewise distinguishes grindability tests from abrasion testing. [3]
For a purchasing review, avoid turning “higher grade” into “harder ore” or “more expensive balls required.” Ask which mechanical properties were measured, on which sample, and for which grinding stage. A laboratory result without its sample identity and test method is an incomplete basis for changing a specification.
Preserve the identity of each feed campaign
Give each stockpile parcel or planned ore domain a traceable identifier. Connect that identifier to sampling date, sample preparation, blend proportions and the period of plant treatment. Ask the site team whether a composite masks a component that matters to the grinding duty. Do not assume that storage history makes every stockpile softer or more abrasive.
Where the plant expects a new feed source, ask its metallurgist to confirm whether existing testwork represents it. Additional testing should answer a defined uncertainty; ordering every available test is not a substitute for a sampling plan.
A handover record for changing ore sources
- Ore source and sample identity, including the planned blend.
- Available grindability and abrasivity results, with method and sample date.
- Feed-size distribution and the approved product-size objective.
- The mill, operating period and relevant changes in liners or settings.
- The decision owner, unresolved questions and the next review point.
This record helps distinguish a change in feed from a change in the supplied media. Keep the mine’s approved product requirement visible: accepting a coarser product would change the comparison.
What should trigger a media-specification review?
If only the metal assay changes, retain the approved specification while checking whether the grinding duty also changed. If the ore domain or feed size changes, have the responsible engineer assess the implications before adjusting diameter or material. If wear or breakage becomes unexplained, reconcile feed history and batch inspection together rather than assigning the cause from a monthly average.
Once the ore context is defined, our media-consumption and plant-trial guide explains the separate task of comparing operating results.
Discuss the defined duty with Gangyan
Shandong Gangyan Grinding Ball Co., Ltd. supplies forged grinding balls for ball and SAG mills. Share your mill, ore-source information, approved diameters, material requirements and destination port. We can review the requested specification and batch inspection records, including chemistry, hardness and dimensional checks. Site suitability remains subject to the plant’s evaluation; this article does not imply a supply relationship with Mallay. Send your technical requirements to Gangyan.
Sources and editorial scope
- Excellon: Mallay pre-commissioning update — 29 October 2026.
- Mallay / Tres Cerros technical report — June 2025, historical process background.
- SGS: SAG Mill Testing — Technical Paper 2011-08, technical background.
Project facts are attributed to the issuer; the handover and decision framework is Gangyan’s editorial analysis. No project-specific media quantity, diameter, grade or performance improvement is inferred.